Set consisting of an ABB AF12-30-01-14 3‑pole contactor with wide‑range electronic coil and an RT18-32(X) 10×38 mm fuse holder, both in good used working condition. Ideal as a ready‑wired starter/switching combination for small three‑phase loads or as spare parts for an existing panel.
-
Main brand: ABB (AF contactor) with RT18‑32(X) style fuse holder (MRO‑marked on front).
-
Contactor type: ABB AF12‑30‑01‑14, 3‑pole contactor with 1 NC auxiliary contact.
-
Rated operational voltage: up to 690 V AC (Ui 690 V, per label).
-
Rated current: 12 A AC‑3 at 400 V, motor power up to approx. 5.5 kW at 400 V.
-
Coil/control voltage: 250–500 V AC/DC wide‑range electronic coil (per “250‑500V50/60HzDC” marking).
-
Standards/approvals: IEC/EN 60947‑4‑1, UL, CE markings on label.
-
Fuse holder type: RT18‑32(X), 1‑pole 10×38 mm cylindrical fuse holder, rated 32 A, 690 V AC.
-
Mounting: DIN‑rail mountable contactor and fuse holder, pre‑wired together with white and black conductors.
-
Extra wiring: several white control wires with plug‑in green terminal block included as shown.
-
Used, removed in good working condition from an industrial control panel.
-
Normal cosmetic signs of use: dust, surface marks, label discoloration and cut cable ends.
-
Housing, terminals and DIN clips on both devices appear intact with no obvious cracks or broken plastic.
-
Fuse inside RT18‑32(X) holder is not verified and should be considered consumable/untested (replace or check before use).
-
Listing is for the complete pre‑wired set: ABB AF12‑30‑01‑14 contactor plus RT18‑32(X) fuse holder and attached wiring, exactly as shown.
-
Coil voltage and motor ratings should be checked carefully against your application requirements before installation.
