Power supply: Omron CPM2C-PA201, input 100–240 V AC 50/60 Hz 0.4 A, output 24 V DC 0.6 A, provides system power for the PLC rack.
CPU: Omron CPM2C-20CDR-D programmable controller, 24 V DC supply, 12 DC inputs (24 V DC 5 mA) and 8 relay outputs (250 V AC/30 V DC 2 A per point, 4 A max/common).
I/O unit: Omron CPM2C-10EDR extension module, 6 DC inputs (24 V DC 5 mA) and 4 relay outputs (24 V DC/250 V AC 2 A per point, 4 A max/common).
Wiring: All three front modules have green plug terminal blocks fitted with blue labeled field wiring leads; wire ends are cut and may be removed or reused by buyer.
All three modules are in good working used condition with typical cosmetic wear (scuffs, light discoloration, and slight label wear).
Yellow DIN‑rail locks and side latches are present and appear intact, allowing the stack to mount directly on a DIN rail.
Front terminal screws and covers look undamaged; existing wiring is still in place for reference.
No original packaging, manuals, or programming/software accessories are included; sale is for the three‑module PLC assembly only.
Ideal as a ready‑built CPM2C control set for small machines or as a drop‑in replacement PLC system (CPU + PSU + I/O) for existing installations.
Programming requires Omron CX‑Programmer (or compatible) and the appropriate CPM2C programming cable; buyer must supply these.
Installation, rewiring, and testing should be performed by qualified personnel, following Omron documentation and local electrical and safety standards.
