Panasonic SUNX DP2-22 Digital Pressure Switch 1MPa Analog Out 24VDC NEW

Brand & Model

• Manufacturer: Panasonic Electric Works (SUNX), Japan

• Model: DP2-22

• Series: DP2 High-Performance Digital Pressure Sensor

• Condition: New, never used, fully functional

• Made in Japan

Technical Specifications

• Pressure type: Gauge pressure

• Rated pressure range: 0 to 1.000 MPa (0 to 145 PSI)

• Set pressure range: -0.050 to 1.000 MPa

• Pressure withstandability: 1.47 MPa (213 PSI)

• Applicable fluid: Non-corrosive gas

• Accuracy: Within 1 percent full scale

• Response time: 2.5 ms or less

Electrical Specifications

• Supply voltage: 12 to 24V DC plus or minus 15 percent

• Current consumption: 50 mA or less

• Output type: 2 NPN open-collector transistors

• Maximum sink current: 100 mA per output

• Analog output: 1 to 5V DC over rated pressure range

• Analog linearity: Within 1 percent full scale

• Output impedance: 1 kilohm approximately

Display Features

• 3.5 digit red LED display with high visibility

• Selectable units: MPa, bar, kgf per square cm, PSI

• LED bar graph display in 10 percent steps

• Sampling rate: 4 times per second

• Displayable range: -0.050 to 1.000 MPa

Output Modes

• Hysteresis mode for standard switching applications

• Window comparator mode for range detection

• Dual output mode for independent threshold control

• Automatic sensitivity setting mode

• Programmable via front panel buttons

Connection Details

• Pressure port: Rc (PT) 1 over 8 female thread

• Pre-wired cable with color-coded leads

• Brown: Plus 12 to 24V DC power

• Blue: 0V ground

• Black: Output 1

• White: Output 2

• Gray: Analog output 1 to 5V

Features & Applications

• Protection rating: IP40 (standard type)

• Operating temperature: -10 degrees C to plus 50 degrees C

• Zero-adjust and span calibration functions

• Settings stored in EEPROM (100,000 write cycles)

• Compact dimensions: 31.6 x 31.6 x 38.5 mm

• Weight: 95 grams approximately

• Ideal for pneumatic systems, compressed air monitoring, leak testing

• Suitable for factory automation, robotics, process control, pressure testing equipment

Additional Information

• CE marked for European compliance

• Can be panel mounted with optional bracket MS-DPX-2

• Compatible with straight bush adapter DPX-03 for male thread connection

• Front protection cover available as accessory DPX-04

• Mounting brackets and screws included

• User manual with wiring diagrams and setup instructions