Panasonic SUNX DP2-40E Digital Vacuum Pressure Switch -101.3kPa Flat 24VDC

Brand & Model

• Manufacturer: Panasonic Electric Works (SUNX), Japan

• Model: DP2-40E

• Series: DP2 High-Performance Digital Pressure Sensor

• Type: Flat-type vacuum pressure sensor

• Condition: New, never used, fully functional

• Made in Japan

Technical Specifications

• Pressure type: Gauge vacuum pressure

• Rated pressure range: 0 to -101.3 kPa (-30 inHg)

• Set pressure range: 5.1 to -101.3 kPa

• Pressure withstandability: 490 kPa

• Applicable fluid: Non-corrosive gases

• Accuracy: Within 1 percent full scale

• Response time: 2.5 ms or less

Electrical Specifications

• Supply voltage: 12 to 24V DC plus or minus 15 percent

• Current consumption: 50 mA or less

• Ripple tolerance: 10 percent peak-to-peak or less

• Output type: 2 NPN open-collector transistor outputs (Asia/North America standard)

• Maximum sink current: 100 mA per output

• Analog output: 1 to 5V DC over rated pressure range

• Output linearity: Within plus or minus 1 percent full scale

• Output impedance: Approximately 1 kilohm

Display Features

• 3.5 digit red LED display with high visibility

• Selectable units: kPa, kgf/cm², bar, PSI, mmHg, inHg

• LED bar graph display in 10 percent steps

• Sampling rate: 4 times per second approximately

• Displayable range: 5.1 to -101.3 kPa

Output Modes

• Hysteresis mode for standard vacuum switching applications

• Window comparator mode for range detection

• Dual output mode for independent threshold control

• Automatic sensitivity setting mode

• Front-panel programming via three buttons

Connection Details

• Pressure port: Rc (PT) 1/8 female thread

• Pre-wired cable with color-coded leads

• Brown: Plus 12 to 24V DC power

• Blue: 0V ground

• Black: Output 1

• White: Output 2

• Gray: Analog output 1 to 5V

Features & Applications

• Flat compact design: 17mm thick profile saves space

• Protection rating: IP40 standard

• Operating temperature: -10°C to +50°C

• Storage temperature: -10°C to +60°C

• Zero-adjust and span calibration functions

• Settings stored in EEPROM (100,000 write cycles guaranteed)

• Dimensions: 31.6 x 31.6 x 17mm approximately

• Weight: Approximately 70 grams

• Ideal for vacuum pick-and-place systems, vacuum grippers, leak detection

• Suitable for semiconductor handling, packaging lines, vacuum forming, suction cups