ABB three‑pole manual switch‑disconnector (load break switch) assembly on a steel mounting plate, with LINE/LOAD markings and auxiliary terminal block. Used but in good working condition, removed from service.
Brand: ABB
Type: 3‑pole manual switch‑disconnector / load break switch (likely OT/OTL or similar ABB series in the ~160–200 A range, based on construction and studs).rsdelivers+3
Poles: 3 main poles, labeled LINE 1/3/5 and LOAD 2/4/6 on front labels.
Operation: Front shaft for door‑mounted or panel‑mounted handle; current shaft shown but handle not included in photos.ilecsys+2
Mounting: Base‑mounted on galvanized steel plate with heavy duty line/load studs and side shields for each pole.ipd+2
Auxiliary terminals: Side terminal block labeled 13‑14, 21‑22, 33‑34 for auxiliary contacts or control wiring.
Typical ratings for this ABB class: up to 690–1000 V AC, around 200 A AC‑22/AC‑23 depending on exact catalog number (buyer should verify from the label and ABB datasheet).onninen+4
Application: Main isolator or load break switch for three‑phase feeders, motor control centers, or distribution panels.
Used, in working condition when removed; visual inspection shows intact mechanism and contacts visible through inspection windows.
Cosmetic wear: dust, minor oxidation on copper/steel hardware, and panel marks from previous installation.
Mounting plate and studs are complete; auxiliary terminal block and wiring pigtails present.
Handle is not shown; assume only the base switch and shaft are included unless you add a separate photo of the handle.
