Set consisting of an ABB AF12-30-01-14 3‑pole contactor with wide‑range electronic coil and an RT18-32(X) 10×38 mm fuse holder, both in good used working condition. Ideal as a ready‑wired starter/switching combination for small three‑phase loads or as spare parts for an existing panel.
Main brand: ABB (AF contactor) with RT18‑32(X) style fuse holder (MRO‑marked on front).
Contactor type: ABB AF12‑30‑01‑14, 3‑pole contactor with 1 NC auxiliary contact.
Rated operational voltage: up to 690 V AC (Ui 690 V, per label).
Rated current: 12 A AC‑3 at 400 V, motor power up to approx. 5.5 kW at 400 V.
Coil/control voltage: 250–500 V AC/DC wide‑range electronic coil (per “250‑500V50/60HzDC” marking).
Standards/approvals: IEC/EN 60947‑4‑1, UL, CE markings on label.
Fuse holder type: RT18‑32(X), 1‑pole 10×38 mm cylindrical fuse holder, rated 32 A, 690 V AC.
Mounting: DIN‑rail mountable contactor and fuse holder, pre‑wired together with white and black conductors.
Extra wiring: several white control wires with plug‑in green terminal block included as shown.
Used, removed in good working condition from an industrial control panel.
Normal cosmetic signs of use: dust, surface marks, label discoloration and cut cable ends.
Housing, terminals and DIN clips on both devices appear intact with no obvious cracks or broken plastic.
Fuse inside RT18‑32(X) holder is not verified and should be considered consumable/untested (replace or check before use).
Listing is for the complete pre‑wired set: ABB AF12‑30‑01‑14 contactor plus RT18‑32(X) fuse holder and attached wiring, exactly as shown.
Coil voltage and motor ratings should be checked carefully against your application requirements before installation.
