Omron CJ1M-CPU13 PLC System w/ PA202 PSU, NCF71, DRM21, ID232 & (2x) OD232 I/O

Omron CJ1M-CPU13 PLC System w/ PA202 PSU, NCF71, DRM21, ID232 & (2x) OD232 I/O Modules

- Shipping includes tracking info worldwide. Klaus KLJ Trading

• CPU: Omron SYSMAC CJ1M‑CPU13, Unit Ver. 3.0 programmable controller.​​

• Power Supply: CJ1W‑PA202 AC100–240 V input power supply module.​​

• Communication / Network:

  • CJ1W‑NCF71 Mechatrolink (MLK) motion control interface.​​

  • CJ1W‑DRM21 DeviceNet master unit (MS/NS LEDs, NODE ADR switches).​​

  • (Front green plug and small interface likely a field DeviceNet connection; can be left with system.)​

• I/O Modules:

  • 1x CJ1W‑ID232 DC input unit, 24 V DC, 4 mA per point (orange label “ID232”).​​

  • 2x CJ1W‑OD232 transistor output units, 24 V DC, 0.5 A per point (yellow label “OD232”).​​

• Backplane / Base: CJ1 expansion rack with beige/yellow I/O terminal blocks.​​

Condition (Used – Good, Working)

• System removed from a working installation; powered and basic I/O and comms functions verified where possible.​

• All modules present, fully seated and mechanically secure; plastic housings show light scuffs/dust but no cracks or broken clips.​

• Terminal screws on PA202 and I/O modules intact; several field wiring plugs and adapters included as shown (buyer may reuse or remove).​

• Unit version 3.0 CPU: supports function blocks, Serial Gateway and enhanced instructions.​​

• Battery status unknown; recommend buyer replace backup battery (CJ1W‑BAT01) as routine maintenance after installation