Telemecanique LC1D25008M7 Contactor 4-Pole 40A AC-1 2NO/2NC 220–240V AC Coil New

Telemecanique LC1D25008M7 TeSys D four‑pole power contactor with 220–230 V 50 Hz / 220–240 V 60 Hz AC coil. New, never used unit supplied in its original box, ideal for general power switching and motor control where 4 poles and 2NO/2NC contacts are required.

Item details

• Brand: Telemecanique / Schneider Electric

• Model: LC1 D25008M7 (LC1D25008M7)

• Type: TeSys D series 4‑pole contactor with screw terminals

• Contact configuration: 4 poles, typically 2 NO + 2 NC (R1/R2/R3/R4 terminals visible on front)

• Rated thermal current: Approx. 40 A AC‑1 at up to 415–440 V (per LC1D25/25008 data)

• Utilisation: Power contactor for AC‑1 loads (resistive and slightly inductive) and auxiliary duties; can also be used in some motor/control applications where 4 poles are needed

• Coil voltage: 220–230 V 50 Hz / 220–240 V 60 Hz AC (M7 coil code, printed on box)

• Rated operational voltage: Power circuit up to around 690–1000 V AC depending on installation and standards (Ui up to 1000 V and impulse withstand Uimp 8 kV quoted for this type)

• Application: General power switching, multi‑pole control, three‑phase plus neutral circuits, or circuits requiring both normally‑open and normally‑closed contacts in one device.

• Country of manufacture: France (printed on box).

Condition

• New, never used; contactor remains in original Telemecanique packaging.

• Terminals appear unused with no screwdriver marks; front label and blue actuator look clean.

• Box shows light shelf wear but is structurally intact.

Notes

• This is an AC‑coil contactor; ensure your control voltage is 220–230/240 V AC at 50/60 Hz before installation.

• Designed primarily for AC‑1 duty; if used for motor control, check the LC1D25/25008 datasheet for appropriate AC‑3 ratings and ensure coordination with overload relay.

• Compatible with TeSys D accessories (auxiliary blocks, clip‑on overloads for matching frames); none are included in this listing.